Four Things Your Company Should Do to Prevent Forklift Accidents

Forklifts are vehicles that can cause severe harm to pedestrians without proper care or attention. Even if you might drive them very slowly, they can still cause damage in multiple ways that can put people’s livelihoods at risk. For businesses that involve forklifts and other equipment, an injured worker means less productivity for a lengthy period of time.

A major priority at your workplace should be to prevent forklift accidents from occurring whenever possible. Here are four suggestions to ensure nobody inside your warehouse has the chance of getting harmed.

1.Enforce Responsible Driving

Anybody who is licensed to operate a forklift should be properly trained by how to use a forklift safely. This includes slowing down before making turns to prevent the forklift from possibly falling over. Operators also should know better than to try to move a load that isn’t stable, and the operators should see that unstable loads are tended to before moving with a forklift. If you have not already prohibited the use of headphones or smartphones while driving a forklift, you should strongly consider doing so. Drivers cannot afford to let their guards down even for a second.

2.Give Safety Upgrades to Your Forklift

In most cases, you can never be too careful when choosing what to buy for your forklift to make it safer. One game-changing addition that we consider is a wireless forklift camera. What is great about a forklift camera is that you can mount it from any position and get a helpful view that your operator can see right from the dashboard. Forklift cameras can also aid in helping the operator guide forks through spaces inside pallets. It is also important to know that every forklift is required to have a set of lights, so be sure to buy forklift warning lights to increase the awareness of moving forklifts inside your facility. Lights not only help give the driver visibility, but they help pedestrians see the forklift and where it is headed.

3. Ensure Pedestrians Stay Safe

Of course, not every forklift accident is because of a careless operator, but from other factors, whether it be a pedestrian who isn’t aware of his or her surroundings, dim lighting, and objects that are in the way. To be sure that pedestrians are out of harm’s way, you should assign designated travel paths both for forklifts and pedestrians, so that there is minimal chance for a person on foot to be in the way of a forklift. Forklifts work best in wide aisles and open spaces that are free of any clutter. Walkways and doorways for pedestrians also need to be obstruction-free.

You should also consider training employees on pedestrian safety as you would train forklift safety to operators. What you should especially teach is to not walk under heightened forks and to not touch a load while the forklift is moving.

4. Check Your Forklift for Problems

It’s not always unlikely that a forklift might act up and cause an accident that is beyond the operator’s control. Forklift problems need to be sought after often so that problems can be fixed before they occur. Six things to look for when checking for forklift problems include steering, clutch, transmission, brakes, mast assembly, and shift linkage. Be sure that emissions and exhaust are safe and clean.


Forklifts require a lot of attention and care in order to prevent accidents. This includes attention and effort by all your staff working inside your facility. Consider these four vital suggestions to ensure work with your forklift is done safely at all times.